Hydrocarbon recovery process

Recovery at the source

Codinamex proposes a mobile, staged treatment approach for hydrocarbon streams returned to the surface after acid or non-acid well stimulation. The feedstock and contaminants must be characterized before selecting a recovery route.

Explore validation requirements
Hydrocarbon separation and treatment

Separation and conditioning

A project may use in-line separation and conditioning modules to recover a measurable hydrocarbon fraction. Recovery rate, product quality, treatment time and residual streams depend on the feedstock and must be established through sampling and trial data; total recovery is not guaranteed.

Discuss your project

Recovery & Treatment Workflow

A project-specific path from contaminated streams toward recoverable materials and accountable water management.

Conceptual illustration: Recovery at the source

01 / 06

Recovery at the source

Contaminated hydrocarbon streams are assessed to identify recoverable fractions and appropriate handling requirements.

02 / 06

Separation and conditioning

The process concept can combine physical separation and treatment stages suited to the feedstock and its contaminants.

Conceptual illustration: Separation and conditioning
Conceptual illustration: Associated water management

03 / 06

Associated water management

Separated water and other residual streams require characterization, containment and a treatment route appropriate to local requirements.

04 / 06

Quality assurance

Sampling and independent analysis help determine whether recovered products meet project specifications and applicable standards.

Conceptual illustration: Quality assurance
Conceptual illustration: Residual materials

05 / 06

Residual materials

Sludges and other byproducts are assessed for further recovery or responsible management.

06 / 06

Treated output and documentation

The project records material balances, inspection results and disposition of each output stream.

Conceptual illustration: Treated output and documentation

Evidence and validation status

No project-specific recovery yield, product-quality certificate or independently verified case report is published on this page. A technical proposal should identify the feedstock, contaminants, sampling method, test duration, material balance and acceptance criteria.

Discuss a validation program

Translate »